If the mGuard is operated in Router mode, it must be set as the default gateway on the locally connected computers. Īs in the other modes, firewall and VPN security functions are available (depending on licence). – In Power-over-PCI mode, the LAN port is the LAN socket of the FL MGUARD PCI(E)4000, FL MGUARD PCI(E)4000, FL MGUARD PCI 533/266. – FL MGUARD SMART2 : the LAN port is the Ethernet connector. The mGuard is connected to a local network or a stand-alone computer via its LAN port: – FL MGUARD SMART2 : the WAN port is the Ethernet socket. The mGuard is connected to the Internet or other “external” parts of the LAN via its WAN port. If the mGuard is in Router mode, it acts as the gateway between various subnetworks and has both an external interface (WAN port) and an internal interface (LAN port) with at least one IP address. Here auto MDIX is permanently switched on, so it does not matter if the auto negotiation parameter is disabled.ĭefault setting for TC MGUARD RS4000/RS2000 3G, FL MGUARD RS4004/RS2005, FL MGUARD GT/GT, mGuard Centerport (Innominate), FL MGUARD CENTERPORT, FL MGUARD BLADE -Controller, mGuard delta (Innominate) Connect the mGuard s to the DTE interface using an Ethernet crossover cable.
The mGuard platforms have DTE interfaces.
Reset mguard smart serial#
For a more detailed explanation of the options for using the serial interface (and a built-in modem), see "Modem" on page 184. The details for this must be configured on the General, Dial-out, Dial-in and Modem/Console tabs. For devices with a built-in modem (analog modem or ISDN terminal adapter), the modem can also be used to combine access options. Alternatively, the serial interface can also be used as follows: for PPP dial-in into the local network or for configuration purposes. For devices with a serial interface, the connection to the external network can also or additionally be established via the serial interface using a modem. The WAN port is used to connect to the external network. The LAN port is connected to a stand-alone computer or the local network (internal). TC MGUARD RS2000 3G, TC MGUARD RS2000 4GįL MGUARD GT/GT, FL MGUARD RS, FL MGUARD PCI 533/266, FL MGUARD BLADE, FL MGUARD DELTA, mGuard Centerport (Innominate), mGuard delta (Innominate)ġSee "Serial console via USB" on page 190. The mGuard has the following interfaces with external access:
0 kommentar(er)
